Integrating Lever with Teamable

This feature is available to users on the Essential and Premium plans.

Integrating Lever with Teamable allows for a more seamless candidate management experience. Teamable will automatically push candidates to Lever as you source them and will help identify duplicate candidates against candidates your team has already contacted.

Requirements

  • You must be a Super Admin in Lever
  • You must be an Admin in Teamable
  • A Teamable Lever Partner API Key AND a Clara Lever Partner API Key
Please note, full integration will require two different Partner API keys, one for Teamable (gives Teamable the ability to push candidate data) and one for Clara (gives Teamable the ability to pull candidate data).

Creating the Teamable Lever Partner API Key

Step 1. On any Lever page, select your Profile Photo and then select the "Settings" option.

Step 2. On the left-side "My account" menu, select "Integrations and API".

Step 3. On the Partner integrations tab, scroll down to the Communication section and enable "TopFunnel".



Step 4. Select "Generate New Key" and copy the generated API key.


Step 5. With the copied API key from Lever, go to the Teamable site and at the top-right corner of the page, select your Profile Photo. Then select "Settings".

Step 6. Select the "ATS Connect" tab, then under the "Select an ATS" section, select "Lever".

Step 7. Paste the copied Teamable Partner API key from Lever into the "Your Teamable Partner Lever API Key" box. Please note, if you lost the key or did not store the key prior to this step, you will need to create a new API key.

Step 8. Select "Save" and go to the next step to add the Clara Partner API key.

Creating the Clara Lever Partner API Key

Step 9. Go back to the Lever "Integrations and API" page. On the Partner integrations tab, scroll down to the Communication section and enable "Clara".

Step 10. Select "Generate New Key" and copy the generated Clara Partner API key.


Step 11. With the copied Clara Partner API key from Lever, go to the Teamable page under the ATS Connect tab again and paste the Clara Partner API key into the "Your Clara Partner Lever API Key" box. Please note, if you lost the key or did not store the key prior to this step, you will need to create a new API key.

Step 12. Select "Save" and you're done!

It may take a few hours or up to 24 hours for Teamable to completely sync to your Lever. Please contact support@teamable.com for more details or if the sync takes longer than 24 hours.
Did this answer your question? Thanks for the feedback! There was a problem submitting your feedback. Please try again later.

Still need help? Contact Us Contact Us